- Joined
- 21 Jul 2004
- Messages
- 43
- Reaction score
- 0
- Country
Hi,
Just taken off the old plastic coving round the bath to replace it as it was old and needed freshing up. Now at the back of my bath there was always cut off tiles running parallel to the back of the bath and sealed round the edges of wall/bath. I always wondered why they were there but now I know. I removed all the tiles along the back ledge of the back to find they cover a gap between bath and tiled wall. I measured it as 1cm on the outside up to 2.5cm on the inside where the two tiled walls meet.
Does anyone have an idea what i should fill this with? There was some old wood there before but i expect it will be a bit of a mare to get the size right.
Any ideas gratefully received.
many Thanks again
Russell.
Just taken off the old plastic coving round the bath to replace it as it was old and needed freshing up. Now at the back of my bath there was always cut off tiles running parallel to the back of the bath and sealed round the edges of wall/bath. I always wondered why they were there but now I know. I removed all the tiles along the back ledge of the back to find they cover a gap between bath and tiled wall. I measured it as 1cm on the outside up to 2.5cm on the inside where the two tiled walls meet.
Does anyone have an idea what i should fill this with? There was some old wood there before but i expect it will be a bit of a mare to get the size right.
Any ideas gratefully received.
many Thanks again
Russell.