Bath mixer / shower taps for 140mm betwen centres inlet.

Joined
23 Mar 2006
Messages
150
Reaction score
1
Location
Essex
Country
United Kingdom
Hi All, I was hoping someone can advise as I purchased a deck mounting bath / Showe Mixer tap to replace my dated ones over the weekend only to find that it does not match the holes in the bath! The current holes are 140mm between centres rather than the 180 required. Ooops... I just assumed that it was a standard size!

I can not find much info on my google search for mixer sets to match this bath. Most do not even list the details for the inlets. I assume as the majority are a standard fit?

What should I be looking for in the descriptions or am I limited to 2 standard taps or the same Victorian upstand traditional type with cranked legs?

Any help very much appreciated.
 
Last edited:
Sponsored Links
Joined
31 Jan 2011
Messages
703
Reaction score
253
Location
St. Kilda
Country
United Kingdom
This style, and swing the legs to suit the hole centres.

bath mixer.PNG
 
Joined
23 Mar 2006
Messages
150
Reaction score
1
Location
Essex
Country
United Kingdom
Thanks but that's what I want to move away from style wise if at all possible. Kev.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Top