:help:
Hi,
Extractor fan stopped working (greenwood axs100svit with timer) so thought I would replace it (Manrose gold with timer). Bit confused with the current wiring though...
Both the bathroom fan (stopped working) and the shower room fan (still working) are wired in as follows:
- neutral - brown
- switch live - grey
- permanent live - black
Plus, earth - yellow/green not wired in or exposed, just cut back to sheath.
But, the isolator switches are both wired as follows:
- neutral - grey
- switched live - brown
- permanent live - black
- earth - yellow/green - Ends in connection block.
Should the wiring not be consistent at fan and at isolator switch re which is neutral and which is SL???
Advice much appreciated, thank you
Hi,
Extractor fan stopped working (greenwood axs100svit with timer) so thought I would replace it (Manrose gold with timer). Bit confused with the current wiring though...
Both the bathroom fan (stopped working) and the shower room fan (still working) are wired in as follows:
- neutral - brown
- switch live - grey
- permanent live - black
Plus, earth - yellow/green not wired in or exposed, just cut back to sheath.
But, the isolator switches are both wired as follows:
- neutral - grey
- switched live - brown
- permanent live - black
- earth - yellow/green - Ends in connection block.
Should the wiring not be consistent at fan and at isolator switch re which is neutral and which is SL???
Advice much appreciated, thank you