- Joined
- 15 Jul 2022
- Messages
- 72
- Reaction score
- 2
- Country
Hi All,
I hope you are doing well.
I have screwed the floor boards so I don't have any movement and squeaks.
I have put extra 5mm ply wood on top and screw them in.
Now I have these items:
1. STS screws and washers
2. STS 10mm insulation boards
3. EVO-STIK 1L Flexibond Tile Adhesive Primer
I think I should prime the plywood before I put the adhesive and STS boards
What primer can I use for that? I think regular red Evostik PVA isn't good.
The primer below is going to be added into the adhesive.
Thank you
I hope you are doing well.
I have screwed the floor boards so I don't have any movement and squeaks.
I have put extra 5mm ply wood on top and screw them in.
Now I have these items:
1. STS screws and washers
2. STS 10mm insulation boards
3. EVO-STIK 1L Flexibond Tile Adhesive Primer
I think I should prime the plywood before I put the adhesive and STS boards
What primer can I use for that? I think regular red Evostik PVA isn't good.
The primer below is going to be added into the adhesive.
Thank you
Last edited: