Please can I ask for some advice for problems I'm having with a Baxi Platinum Combi 28 HE A I had installed around 5 months ago.
We noticed we had no hot water yesterday and had code E19 flashing, with the pressure below 0.5. We repressurised the system, but a couple of hours noticed it had dropped again.
We then repressurised again, but this time foolishly we went too high (it hit 3). We've bled a radiator to bring the pressure back down and it's now around 1 but we have no water coming out of the hot water taps. The central heating light comes on and the radiators are clanking like they should be working but there's no heat in them either.
Any advice gratefully received.
We noticed we had no hot water yesterday and had code E19 flashing, with the pressure below 0.5. We repressurised the system, but a couple of hours noticed it had dropped again.
We then repressurised again, but this time foolishly we went too high (it hit 3). We've bled a radiator to bring the pressure back down and it's now around 1 but we have no water coming out of the hot water taps. The central heating light comes on and the radiators are clanking like they should be working but there's no heat in them either.
Any advice gratefully received.
