- Joined
- 13 Dec 2005
- Messages
- 11
- Reaction score
- 0
- Country
Have had PCB on boiler replaced last week, as it was buzzing when it started up and was not lighting the main burner.
Now it will start up, but when its not been on for a while it takes a few tries to light the main burner (clicks on, then off immediately but after 3-4 tries fires).
It then seems to stop quite quickly and fire up again within a minute or two at which time the main burner always seems to light without a problem (i.e. one click and its on).
Any ideas - I am paranoid about it failing completely again in these cold days, especially as it took 4 visits to get the first problem identified and resolved (at least to this point!)
Now it will start up, but when its not been on for a while it takes a few tries to light the main burner (clicks on, then off immediately but after 3-4 tries fires).
It then seems to stop quite quickly and fire up again within a minute or two at which time the main burner always seems to light without a problem (i.e. one click and its on).
Any ideas - I am paranoid about it failing completely again in these cold days, especially as it took 4 visits to get the first problem identified and resolved (at least to this point!)
