Hi all,
Hopefully I can explain my problem.
We have a Baxi solo2 RS boiler. This morning it hadn’t fired up(has happened before). A while ago it wouldn’t fire up and kept tripping out. When it attempted to fire up, there was a lot of clicking noises coming from the boiler sometimes firing up, but some times after a while the reset button would trip out and pilot light go out. After a lot of process I thought I had narrowed it down to the CH valve. The small little micro switch was lose, it hadn’t been switching on and off probably and had shorted out. I replaced this and every thing has been great. This was about 6 to 8 months ago.
Apart from this morning. No heating or hot water, boiler gone out and reset button tripped. I re-fired it up and the clicking/switching noise has come back. I have checked the micro switch in the valve but this is tightly done up.
Any ideas or advice??
Sorry for the length of post hope it makes sense
Hopefully I can explain my problem.
We have a Baxi solo2 RS boiler. This morning it hadn’t fired up(has happened before). A while ago it wouldn’t fire up and kept tripping out. When it attempted to fire up, there was a lot of clicking noises coming from the boiler sometimes firing up, but some times after a while the reset button would trip out and pilot light go out. After a lot of process I thought I had narrowed it down to the CH valve. The small little micro switch was lose, it hadn’t been switching on and off probably and had shorted out. I replaced this and every thing has been great. This was about 6 to 8 months ago.
Apart from this morning. No heating or hot water, boiler gone out and reset button tripped. I re-fired it up and the clicking/switching noise has come back. I have checked the micro switch in the valve but this is tightly done up.
Any ideas or advice??
Sorry for the length of post hope it makes sense