Best way to fix vinyl floor to shed base?

[alan0259]

Just wondering if I should use the spray adhesive or use clout nails that you use for roofing felt.

The shed is 12 x 7 and I have a huge roll of 3mm thick vinyl.

The base is made out of 18mm exterior plywood.

Shed houses a heavy motorbike...

Posh shed I know

 

[ImayKnow]

Do you really need to stick it down Alan? If you cut it so it goes tight up to the edges of the shed base, I doubt it will move.

 

[Pigeon85]

Do you really need to stick it down Alan? If you cut it so it goes tight up to the edges of the shed base, I doubt it will move.

agree, I take it there will be cupboards etc in there to hold it down. If you do find it moving then just get a spray adhesive to go around the edges.
I would get a carpet strip to go across the entrance to stop it getting kicked up.

 

[alan0259]

In the end I bought some evostick adhesive spray and this stuff STICKS

I'll use clout nails in the future if it comes away.

Thanks for the carpet grip idea, I will definately use that for the entrance!