block wall strength

[matlob]

Hi
I'm currently build a wall between a house and garage (tied in with wall ties)

It's a cavity wall but I need to build it fairly quick as I need to get a flat roof on before it gets too cold.

If I was to just build the inner block work (7.2n fibolites) would this be strong enough temporarily or a no go due to wind etc.

Wall is 2.5m wide and 2.5 high and tied in both sides

Thanks for any help

 

[noseall]

Hi
I'm currently build a wall between a house and garage (tied in with wall ties)

It's a cavity wall but I need to build it fairly quick as I need to get a flat roof on before it gets too cold.

If I was to just build the inner block work (7.2n fibolites) would this be strong enough temporarily or a no go due to wind etc.

Wall is 2.5m wide and 2.5 high and tied in both sides

Thanks for any help

An end restrained 100mm block wall will be man enough, yes. Don't forget tie wires etc.

 

[matlob]

Perfect, thanks for that.

I'll add the ties as I go up ready for the outer wall!