I have a Thorn M - gas fired boiler (20 years old?). When I tried to switch to heating this morning it did not work. The pilot light to the boiler is on, the pump is working and there is a 240V supply to the gas regulator (is this a solenoid?) block. I have metered out between live and neutral on the regulator plug and there is no continuity, I have also metered on the contacts that the plug leads to and again there is no continuity.
Yes it should show some resistance - not sure of the figure off hand - the terminals connect to the ends of a coil, so there should be continuity. So the solenoid must be faulty.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local