Boiler problems

fus

Joined
5 Jun 2010
Messages
2
Reaction score
0
Location
Sussex
Country
United Kingdom
I have a Baxi Combi instant 105E.

I have a problem where the lights on the front display go out and I get no hot water for a little while, then after a while they come back on and everything is ok. I have recently had the "board" replaced but still the symptoms persist. Any ideas ???

Ps, due to an original problem (water going hot and cold) I have had the diverter valve motor replaced as well as the diaphragm inside the diverter valve. Not sure if this has any relevance but it just seems that the boiler is generally unwell !

Thanks
 
I have a Baxi Combi instant 105E.

I have a problem where the lights on the front display go out and I get no hot water for a little while, then after a while they come back on and everything is ok. I have recently had the "board" replaced but still the symptoms persist. Any ideas ???

Ps, due to an original problem (water going hot and cold) I have had the diverter valve motor replaced as well as the diaphragm inside the diverter valve. Not sure if this has any relevance but it just seems that the boiler is generally unwell !

Thanks

Sounds like it is overheating and the overheat thermostat kicking in.
Did one similar and it was the thermistors. Replacing board was
probably a waste of time. Take a look at what happens to the temperature when running hot water or heating does it start getting too
hot.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top