Hi
I have an integral Bosch dishwasher 9000 104 182 and noticed that the quick (25min) cycle we use was still going after 55 mins. Yesterday the OH checked the pump at the base which was clear but found a blockage from outlet pipe. This was cleared and the machine was retried and worked fine for the allocated time . However, today I put the cycle on as normal and again the machine just seems to keep going with no finishing. We have water coming in and out- pipe was rechecked- no blockages and pump clean. Arms have water going through them ok and the pump is working and there is heat. We have reset it several times but any ideas before we call in an engineer/ buy a new one
would be grateful
I have an integral Bosch dishwasher 9000 104 182 and noticed that the quick (25min) cycle we use was still going after 55 mins. Yesterday the OH checked the pump at the base which was clear but found a blockage from outlet pipe. This was cleared and the machine was retried and worked fine for the allocated time . However, today I put the cycle on as normal and again the machine just seems to keep going with no finishing. We have water coming in and out- pipe was rechecked- no blockages and pump clean. Arms have water going through them ok and the pump is working and there is heat. We have reset it several times but any ideas before we call in an engineer/ buy a new one
would be grateful
