Bosch PKE611E 14E

[albert2]

My problem is with wiring up conections on a Bosch PKE611E 14E
The diagram underneath is so vague end misleading. Anyone help with advice.
Thanks

 

[danechip]

Live to L1, L2 and L3 if you have L3. (Only up to L2 for the french market for split load b0llox)

Neutral to terminals 4 and 5 (They should be bridges already)

Hope this helps, and fitted 3 or 4 of these.

Dan.

 

[ban-all-sheds]

There are a lot of hobs designed for French market and they have two supplies to work with their split phase system.

I didn't know the French had a split phase system.

Sure they aren't designed like that for ease of implementing their load shedding systems - i.e. turn the kettle on and half the hob goes off for a few minutes?