Bra wire
- Thread starter mrs.shonk
- Start date
Erm, you'll probably have to take most of the machine apart, but you might get lucky if you take the door seal off.
If you remove the lid (isolate the machine electrically first) you should find a retaining clamp around the hidden part of the door seal. If you remove this then you can slip the seal off the drum and peer around it. See if rotating the drum brings the wire into a reachable position. If not then you'll have to take the drum out.
If you remove the lid (isolate the machine electrically first) you should find a retaining clamp around the hidden part of the door seal. If you remove this then you can slip the seal off the drum and peer around it. See if rotating the drum brings the wire into a reachable position. If not then you'll have to take the drum out.
Before the full stripdown the majority of times your bra wire will have located itself at the bottom of the tub outlet. This is always the first place to try. Disconnect the large sump pipe at the bottom of the tub and feel around inside if the wire is not already sticking out.
- Joined
- 2 Apr 2006
- Messages
- 1,896
- Reaction score
- 29
- Country
Failing the above, remove the heater and you'll be able to see into the drum, locate and remove the wire.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
