Breathable membrane detail

Joined
30 Mar 2015
Messages
4,752
Reaction score
95
Country
United Kingdom
I’m after some advice on how I finish the top part of this membrane please. Originally, I had planned to trap it under the roof joists but I overlooked that when working on the joists.

Now I was thinking that I tucked it under the soffit as that will ensure there isn’t an opening at the top of the membrane for water to run through.

Can you please advise. Thanks in advance.
 

Attachments

  • IMG_9374.jpeg
    IMG_9374.jpeg
    642 KB · Views: 21
I’m after some advice on how I finish the top part of this membrane please. Originally, I had planned to trap it under the roof joists but I overlooked that when working on the joists.

Now I was thinking that I tucked it under the soffit as that will ensure there isn’t an opening at the top of the membrane for water to run through.

Can you please advise. Thanks in advance.
The threat is of driven water from the front. The roof is protecting the top. Fold it down and staple it to the battens.
 
The threat is of driven water from the front. The roof is protecting the top. Fold it down and staple it to the battens.
That's a neat solution.
I was thinking that if I trap it under the soffit, no water would get in as this section is boxed in with soffit and fascia.

Let me know if you think there is any merit in that, else I will do as you have suggested.
 
That's a neat solution.
I was thinking that if I trap it under the soffit, no water would get in as this section is boxed in with soffit and fascia.

Let me know if you think there is any merit in that, else I will do as you have suggested.
It's a low risk zone regardless, what with the roof overhang. If it was a piece of lead and tile hanging, for example, it would be dressed over the top course of tiles.
 
It's a low risk zone regardless, what with the roof overhang. If it was a piece of lead and tile hanging, for example, it would be dressed over the top course of tiles.
only because my cladding layer is likely to be next year, I may slide this end of the membrane under the soffit to finish it off neatly. That's if I get around to the soffit and fascia this year!
Thanks again.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top