pass water.. or do they last rather a long time)
can bleed valves on rads were out
- Thread starter helptavner
- Start date
They can last for ever, but being made of brass, its possible for the tapers to become grooved with wear, which could allow a slight leak.
John
John
only reason i ask, when dabbing tissue on some of them after bleeding i get a tiny bit of water...but im guessing this will stop ?!
There could be the odd drop in the well that the bleed screw sits in, but once thats gone, all should be dry.
Any tiny leak could well take up - this often happend with any mechanical joint - until the next time its disturbed. Also, the heat from the rad will also evaporate any tiny seepage, often enough.
John
Any tiny leak could well take up - this often happend with any mechanical joint - until the next time its disturbed. Also, the heat from the rad will also evaporate any tiny seepage, often enough.
John
There could be the odd drop in the well that the bleed screw sits in, but once thats gone, all should be dry.
im guessing its this thanks.. ^^^^
just get scared!!
im guessing its this thanks.. ^^^^
just get scared!!
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
