Can someone recommend a good book / guide to underground drainage?

I've found that concrete doesn't actually bond well to salt glaze clay pipe so it's not that hard to expose a pipe with a sharp sds chisel, then slide your rubber over the end and you're away.
 
I will give it a try, but the test I did the concrete was very well stuck.
We have had to do it many times. You need to go easy around the pipe. Use any available mechanical cutting tools at your disposal to weaken the concrete around the pipe first - i.e. grinders, drills, electric hammers etc. Always strive to cut parallel to the pipe rather than bear down directly on it.
 
It could be Supersleeve pipe which Is more like glass that normal clay pipes.
 
It could be Supersleeve pipe which Is more like glass that normal clay pipes.
Indeed so - they used to make a chain wheel cutter for that stuff. Previously the drainlayer would stand a saltglazed pipe in the sand pile, fill with sand and tamp down, then go round and round the pipe with a sharp cold chisel.
 
Construction handbook by Chudley and Greeno

This book arrived yesterday - It's a serious read at 1012 pages, but having flicked through it I think this will be a very useful resource with plenty of diagrams, so thanks again for the recommendation.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top