Can you mix hard wired smoke alarm with wireless ones?

Joined
20 Jul 2020
Messages
34
Reaction score
0
Country
United Kingdom
Have to install new smoke alarms before end of Feb thanks to new Scottish law. Currently have 2 hardwired Deta 1111 in upstairs and downstairs landing which are due for replacement anyway but can I replace the hardwired ones with other hardwired and add another wireless one with a wireless heat alarm.
Don't want to redecorate after a sparky does whatever they have to do to add more wiring or am I better off just going wireless for everything?

Cheers
 
Sponsored Links
Joined
20 Jul 2020
Messages
34
Reaction score
0
Country
United Kingdom
Look at the Acio 3000 series.
Combination of hard wired and wireless devices.
Had a look and they seem to be hardwired with a rechargeable li-on battery or an I not understanding it correctly?
 
Joined
10 Mar 2007
Messages
10,368
Reaction score
2,123
Location
Poole, Dorset
Country
United Kingdom
hardwired with a rechargeable li-on battery
They all require wiring for power. As supplied they can also be linked with a wire (a 3rd core in the cable).
If you want to link two or more together without a link cable (each one supplied from a local power source only), they require a plug-in module https://www.aico.co.uk/product/ei3000mrf-smartlink-module/
If they are all linked wirelessly, all of them need that module.
If some have a wired link, then all of the wireless ones need the module, plus one of the alarms on the wired set so they can communicate with the wireless ones.
 
Sponsored Links
Top