hi there
i have read so many guides etc on how to apparently do this but some contradict others so i need to make sure before i proceed
basically i have a new light to put up on the ceiling replacing a ceiling rose.
the new light unit has a 3 way connector block with live, neutral and live.
the existing light is a loop which has the brown, blue and green etc
am i right in thinking that i need to wire
> the existing blue (neutral) wires to the neutral on the new lights
> the existing yellow (earth) wires to the earth ones on the new lights
> the switch wire which is blue with brown tape to the live on the new lights
> the remaining brown wires to be connected to their own connector block all together ??
would really appreciate some help on this
i have read so many guides etc on how to apparently do this but some contradict others so i need to make sure before i proceed
basically i have a new light to put up on the ceiling replacing a ceiling rose.
the new light unit has a 3 way connector block with live, neutral and live.
the existing light is a loop which has the brown, blue and green etc
am i right in thinking that i need to wire
> the existing blue (neutral) wires to the neutral on the new lights
> the existing yellow (earth) wires to the earth ones on the new lights
> the switch wire which is blue with brown tape to the live on the new lights
> the remaining brown wires to be connected to their own connector block all together ??
would really appreciate some help on this