I’m going to be having my chimney removed to below roof level as it is in a bad state. How should I cap the top of the chimney in the loft? The fireplace below is blocked off with no vents and I do not plan on venting it.
OP,
Removing a chimney stack from above the roof takes away character from your property - stacks are also sometimes a bit of a selling point for a home not just a box for living in.
Given your previous complaints about excessive humidity in the house then sealing the flue at both bottom & top might not be a great idea in terms of ventilation?
OP,
Removing a chimney stack from above the roof takes away character from your property - stacks are also sometimes a bit of a selling point for a home not just a box for living in.
Given your previous complaints about excessive humidity in the house then sealing the flue at both bottom & top might not be a great idea in terms of ventilation?
Hi ree,
We have a piv fitted now and some lap vents air flow seems to be good in the loft now. But we have a leak coming down the side the chimney. My roofers advice was to remove the stack rather than repairs to avoid any issues in the future. But after speaking to building control today the seem to think I need to put an application in although google searches tell me different.
Hi ree,
We have a piv fitted now and some lap vents air flow seems to be good in the loft now. But we have a leak coming down the side the chimney. My roofers advice was to remove the stack rather than repairs to avoid any issues in the future. But after speaking to building control today the seem to think I need to put an application in although google searches tell me different.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local