- Joined
- 11 Sep 2007
- Messages
- 769
- Reaction score
- 31
- Country
Above mixer tap with swan neck, leaking from where the main tap housing connects to the swan neck, there is grub screw holding the swan neck in place.
The leak is quite bad so before I go any further.........
Can this type of tap/leak be fixed, if so whats the procedure OR
Is it bette to save time and just change the mixer over? Its a good few years old, so thinking this might be the better route.
Cheers
The leak is quite bad so before I go any further.........
Can this type of tap/leak be fixed, if so whats the procedure OR
Is it bette to save time and just change the mixer over? Its a good few years old, so thinking this might be the better route.
Cheers
