CCTV Software/Monitor Issue

[Traveler]

Hello everyone,

I'm new to the forum.

I have a two monitor setup for my home network. The monitors have been setup to be used as one extended monitor. My problem is I can't view the images of my CCTV Cameras when the monitors are setup in this manner.

If I switch back to single montior use, I can view the images from my cameras. Any ideas what might be causing this problem?

 

[Alarm]

What DVR is it?
Did you switch off the 75om resistor on the firt and on on the second?
Why not use one as a spot monitor and set it up as a second.

 

[digdilem]

Computer monitor and you're using a computer and software? If so, what software, what cameras - need more info!

 

[Alarm]

Thats it getting these glasses fixed tomorrow!

 

[Traveler]

Computer monitor and you're using a computer and software? If so, what software, what cameras - need more info!

The DVR is the Zmodo 9108. It is networked to my computer. I have six cameras connected to the DVR. The two monitors being used are Samsung 245BW.

The problem is software related. Zmodo is aware of the problem but no updates will be provided in the near future.

Looking for some experts to possibly find a way to work aorund the issue.

 

[digdilem]

Sorry, I don't know anything about these standalone boxes