- Joined
- 24 Mar 2004
- Messages
- 2
- Reaction score
- 0
- Country
Can anyone help. A couple of nights ago my RCD for the house tripped and I traced it back to the heating and water controls. I have an acl lifestyle controls and a Baxi solo bolier. I have tried replacing the controller but get the same fault. The RCD always trips out after 4 seconds. I have wired in the boiler seperately and it works and I can get hot water but the CH doesn't seem to work and the boiler overheats. The programmer was wired in with the boiler power as well and not just the thermostat and cylinder thermostat. ANY IDEAS ?