Central Heating Corrosion Test
- Thread starter John506
- Start date
To test the central heating water take 2 jam jars and fill 1 with mains tap
water and the other with water from the C.H. system via the drain cock.
put some pieces of copper pipe or tape into each jar and some nails.
replace the lid.After one week examine both jars.I did this test and found
that tap water was very rusty.The C.H.water containing FERNOX which
had been in just over one year was clear.
water and the other with water from the C.H. system via the drain cock.
put some pieces of copper pipe or tape into each jar and some nails.
replace the lid.After one week examine both jars.I did this test and found
that tap water was very rusty.The C.H.water containing FERNOX which
had been in just over one year was clear.
It's now seven years ago
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
