Hi, this is my first post, excellent site with lots of useful info on. Anyway hope somebody can help me - I recently moved into a new house and the only heating is run off a solid fuel log/coal burner in the lounge. It runs 4 radiators. 3 upstairs and 1 down stairs in the dining end of the lounge diner. Now the landing radiator has stopped working and the one in the dining room has never worked - I have bled the air from the system several times - it keeps getting air in it as the fire heats the water so quick it always gurgles and sounds like it's boiling and going up the vent pipe. The pump is located upstairs in one of the bedrooms, just next to all of the vent and fill pipe work...questions..
1. SHould I leave the fill pipe valve open all of the time so that even when the water goes up the vent pipe it is replaced?
2. What could cause the landing and dining room rads to not be working - there is no air in them and I have tried to balance all of the radiators? (The landing one worked when we first tried the system)???
Thanks for any help - I will be installing a boiler of some sort over the summer but that will be the subject of a separate post as I have several idea but not sure which is best..
CHeers
Rob
1. SHould I leave the fill pipe valve open all of the time so that even when the water goes up the vent pipe it is replaced?
2. What could cause the landing and dining room rads to not be working - there is no air in them and I have tried to balance all of the radiators? (The landing one worked when we first tried the system)???
Thanks for any help - I will be installing a boiler of some sort over the summer but that will be the subject of a separate post as I have several idea but not sure which is best..
CHeers
Rob
