Chrome fitting needed!

[Need Help21]

People,

Can anyone please advise on where I can obtain the following item in chrome:-

http://www.screwfix.com/prods/90404...15mm-x?cm_re=SEARCHPROMO-_-MALE TAPER-_-90404

It is a 1/2 male taper to 15mm compression angle but in chrome.

Many thanks





Need Help21

 

[Agile]

Very few tapered fittings are available as they are only normally used on gas and radiator fittings ( with only a slight taper so not really a tapered fitting ).

You may have to buy that one and take it somewhere to have it plated.

Or a cheap solution to paint it silver. That is often not very noticeable.

If its for a shower or similar then they usually use parallel fittings. If for a rad then they are usually Ok with a parallel fitting and about 10 turns of PTFE.

Tony

 

[Need Help21]

Thanks Tony, Can you advise where I can get one in a non tapered fitting?

 

[kevplumb]

http://www.yorkshirefittings.co.uk/products_brand.aspx?FolderID=10101&SubFolderID=10166

gives you the fitting code at least

 

[Agile]

K616CP

Expensive though !

Even harder to find anywhere where they stock one !

Some of the expensive places where they sell fancy towel rads might though!

Tony

 

[AlanE]

Parallel 1/2" to 15 mm chrome elbow BES 7625
http://search.atomz.com/search/?sp-q="7625"&sp-a=00031674-sp00000000

 

[Agile]

Oddly I looked in the BES cat before replying but did not see that item in my 10 second search.

Probably because they put all the chrome bits on a different page?

 

[doitall]

Most PTS outlets stock chrome fittings.

 

[Need Help21]

The thing is people I am having trouble sourcing a chrome fitting with a tapered thread. A parallel thread does not suit my application

 

[doitall]

Most PTS outlets stock chrome fittings.