Cleaning artex
- Thread starter Hib
- Start date
Sponsored Links
C
confidentincompetent
I usually get by with 1/2 gall cold water with 4 tablespoons of houseold ammonia. (less suds) I apply with a 4" brush scrub a little with the brush then sponge off dry. Even tho it's artex if you pull the sponge towards you slowly the songe will contact with the artex muchlike a roller. If it's really bad or the artex has never been painted then wipe over and apply zinsser bin shellack based blocker. http://www.zinsser.com/subcat.asp?categoryid=1 Though I believe crown have come out with a primer sealer blocker which is water based, I have not used yet..
http://www.crowntrade.co.uk/en/Products/Primers+and+prep/PSB+Stain+Block+Primer/
good luck..
http://www.crowntrade.co.uk/en/Products/Primers+and+prep/PSB+Stain+Block+Primer/
good luck..
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
