Clipping cables to joists
- Thread starter padstar
- Start date
Sponsored Links
It's not normally possible to clip the cables to joists.
You would have to remove every other floorboard to do it.
You would have to remove every other floorboard to do it.
The floor is currently fully exposed for other works. In this instance should i clip or run along the slab. If i clip will it make any future alterations harder? do vermin chew cables if run on the slab (not that i have a problem with mice etc at the moment).
You can clip them if you want.
It might make alterations more difficult but you can always run another cable.
Vermin chew cables. I suppose out of easy reach will make it more difficult for them.
It might make alterations more difficult but you can always run another cable.
Vermin chew cables. I suppose out of easy reach will make it more difficult for them.
Sponsored Links
Create a tray along the side of the joist and loose lay the cables on the tray. Easy then to replace or add cables ( leave a draw sting along the tray
I have used gutter brackets ( spaced about 2 foot apart ) to support cables under a floor and above the water logged ground
.
I have used gutter brackets ( spaced about 2 foot apart ) to support cables under a floor and above the water logged ground
.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
