Composite door help

Joined
31 Aug 2021
Messages
2
Reaction score
1
Country
United Kingdom
Hi all.

I’m new to this forum and was hoping to get some advice with a new composite door I fitted.

the door seems to be catching the frame at the bottom corner. I have watched videos online on how to adjust the frame but the hinges don’t seem to have any Allen key points.

I have attached a couple of photos for reference.

Any help with me greatly appreciated!

thank you.
 

Attachments

  • BC384E3D-5BD9-4DEC-92FF-27F4F697F2FF.jpeg
    BC384E3D-5BD9-4DEC-92FF-27F4F697F2FF.jpeg
    167.3 KB · Views: 118
  • B9C8801E-EB27-491D-B7F2-4C81A550A122.jpeg
    B9C8801E-EB27-491D-B7F2-4C81A550A122.jpeg
    180.9 KB · Views: 120
  • 544CFCCA-A5A1-4F62-BA2A-A911EF4E5F29.jpeg
    544CFCCA-A5A1-4F62-BA2A-A911EF4E5F29.jpeg
    233.5 KB · Views: 101
  • 299ED355-D203-4336-934C-F4ECBF9B313F.jpeg
    299ED355-D203-4336-934C-F4ECBF9B313F.jpeg
    219.5 KB · Views: 123
Sponsored Links
The Allen key points (which are easy to see on your photo’s) are in the middle of the hinge. Whether they’re adjusting points though I don’t know.
 
Thanks for the message. I’ve tried those points, they don’t adjust the door unfortunately.
 
  • Thanks
Reactions: CBW
Sponsored Links
Using the picture with four screws visible ... firstly mark where they are now ( a reset point if all goes wrong ). You should need to adjust top and bottom hinge . Undo and remove screws 1 and 3 ( counting from top ) . Loosen but DO NOT remove 2 and 4 , the door can physically be moved whilst 2 and 4 are loose . Retighten 2 and 4 and check it is closing correctly , readjust if needed , refit 1 and 3 . Personally I think these types of hinges are rather stupid!
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top