- Joined
- 6 Dec 2010
- Messages
- 9
- Reaction score
- 0
- Country
I have a new extension built with a new cooker point and now I need to connect the dual fuel cooker. The electric over needs a max 7.4KW and the new consumer unit is about 6m away. I was going to connect it using 2m of 6mm / 45amp cable. Is this correct? (does the rating of the consumer unit / cooker RDC unit effect the cable size/rating?)
Also I have some old 6mm cable that is rated at 35?amp ... could I use this?
Also I have some old 6mm cable that is rated at 35?amp ... could I use this?