I am trying to connect a double dimmer switch in my living room/Kitchen but it's all going a bit wrong (has started turning the bedroom light on and off. The dimmer switch looks the same as the picture in the previous post. I have four sets of wires.
Brown Wire 1 - Live feed
Brown Wire 2 - Bedroom
Brown Wire 3 - Living Room
Brown Wire 4 - kitchen
... and a short brown wire which on the previous switch went from common to common
At the moment when I try wiring it up I can only get the switch to work 2 of the lights and even then only one at a time. Can someone explain to me what wire goes where to get all lights working independently of each other.
Cheers
---------------------------------------------------
lynda moderator
please read the forum rules, (17) hi jacking causes confusion
your post has been split
Brown Wire 1 - Live feed
Brown Wire 2 - Bedroom
Brown Wire 3 - Living Room
Brown Wire 4 - kitchen
... and a short brown wire which on the previous switch went from common to common
At the moment when I try wiring it up I can only get the switch to work 2 of the lights and even then only one at a time. Can someone explain to me what wire goes where to get all lights working independently of each other.
Cheers
---------------------------------------------------
lynda moderator
please read the forum rules, (17) hi jacking causes confusion
your post has been split