Trying to connect up the Honeywell relay box to a new vitodens 100 boiler but struggling! Anyone had any success? Thanks. 4 wire connection I believe?
Connecting Honeywell DT92e to Vitodens 100
- Thread starter Sparky1979
- Start date
Use either way:
1. Using 4 core (+ earth)
Relay ------- Vitodens
L ------------- X1/L (left)
N ------------ X1/N (left)
A ------------ X1/L (right)
B ------------ X1/1
or
2. Using 3 core (+ earth)
Relay ----------- Vitodens
L (either) ------- X1/L (left)
N ---------------- X1/N (left)
L (either) link to Relay A
B ---------------- X1/1
In both cases, remove link between L and 1 on the Vitodens (B in wiring diagrams).
1. Using 4 core (+ earth)
Relay ------- Vitodens
L ------------- X1/L (left)
N ------------ X1/N (left)
A ------------ X1/L (right)
B ------------ X1/1
or
2. Using 3 core (+ earth)
Relay ----------- Vitodens
L (either) ------- X1/L (left)
N ---------------- X1/N (left)
L (either) link to Relay A
B ---------------- X1/1
In both cases, remove link between L and 1 on the Vitodens (B in wiring diagrams).
Absolute star. Off to buy some 4 core. Thanks
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
