Connecting to floplast plastic push fit

[tomsim]

Can I use polyplumb fittings and liners to Connect to floplast pipe?

 

[kidgreen61]

Yes

 

[tomsim]

I won't need to buy floplast liners. To accept the poly tee?

 

[denso13]

I prefer to use the same make for pipe and inserts, the fitting don't matter so much.

 

[tomsim]

I could try to get two floplast liners for the 2 tee'd connections on to that. Then a poly liner and tee for the branch. May end up being speedfit pipe I use. So would floplast pipe exempt super seal liners?

 

[tomsim]

I did hear a manager in the merchants say once there OK with using different fittings on there pipes. But try keep the liners the same as the pipe.

 

[denso13]

But try keep the liners the same as the pipe.

Agreed, do this if at all possible.

 

[charliegolf]

It appears that ALL the various makes are compatible with copper. When forced to change makes, you could start the new run with a very short copper infil. Or is that a bad idea?

 

[tomsim]

Agreed, do this if at all possible.

Next thing is to see where sells floplast liners... Not one of the main brands