Hi guys i am new to the forum so i appologise if this question has been asked before, i want to control 2 seperate sets of lights in my garden,from
one 2gang switch, i will come off the ring main with a fused spur,which is RCD protected at the fuse board. do i need a 2gang single pole switch or 2gang double pole switch ip65? do i use flex or cable from FCU to switch,
3or4 core cable then i was going to use rubber flex in conduit into wiska boxes with waterproof glands, is this ok, or i have done SWA terminations before but this is a bit time consuming as im not a pro.!! P.S i live in a basement so no access to any loft space. etc. so i will have to come off the ring main with a FCU, thanks for any help guys chunkykev.
one 2gang switch, i will come off the ring main with a fused spur,which is RCD protected at the fuse board. do i need a 2gang single pole switch or 2gang double pole switch ip65? do i use flex or cable from FCU to switch,
3or4 core cable then i was going to use rubber flex in conduit into wiska boxes with waterproof glands, is this ok, or i have done SWA terminations before but this is a bit time consuming as im not a pro.!! P.S i live in a basement so no access to any loft space. etc. so i will have to come off the ring main with a FCU, thanks for any help guys chunkykev.