Hi All,
I am setting up a inverter and battery bank, I made some cables (70mm2) with a hydraulic crimper from eBay. Results are OK'ish but wanted your opinion whether to crimp it twice (overlaps a bit) or just once in the middle of the lugs.
I've attached picture of both two (on the left) and one crimp (on the right) and do they look OK.
Thanks in advance.
PS: I will be filing down the sharp edges and heat shrinking it later.
I am setting up a inverter and battery bank, I made some cables (70mm2) with a hydraulic crimper from eBay. Results are OK'ish but wanted your opinion whether to crimp it twice (overlaps a bit) or just once in the middle of the lugs.
I've attached picture of both two (on the left) and one crimp (on the right) and do they look OK.
Thanks in advance.
PS: I will be filing down the sharp edges and heat shrinking it later.