Cutting a 45 angle on skirting

[Monkeh]

10" saw to cut 7" i do not think so monkey just likes to have the last word

Yeah, bring personal comments into a useful suggestion, way to show your true colours.

I did, however, miss the depth of the skirting, so I'll suggest a longer, finer toothed saw for the job: http://www.toolchestdirect.com/product.php/site/froogle/sn/BAH24420F

merlin50 denying that a finer toothed saw is of any benefit in 3, 2, 1...

 

[speed]

a finer saw will give a better cut.

why not jsut mark the longpoint on the bottom, short point at the top, square the longpoint up then just freehand cut

 

[raver]

You could always take them to your timber yard if its near, they would make the mitre cuts for you only a very small charge per cut(some would do it for free)

But as has been previously mentioned ive fitte lots of skirting and never found a perfect 45 degree wall always have to slightly fill the mitre in.