Can anyone give some advise on how to cut short the vertical chimney cover of a cooker hood. I need to cut it short by approx. 2".
My ceiling is very low and when the hood is fixed to the wall at the minimum height above the hob the the cover still does not fit! Please advise of how to get the neatest cut and what type of blade/cutter to use (where to buy it if possible).
Also need to cut ventilation grooves at the top as I am now forced to use a carbon filter which recirculates the air, all be it clean, back into the kitchen
+++++++++++++++++++++++++++++
Please read the Forum Rules, especially 1a.
I am deleting your duplicate posts.
Mod Rupert.
+++++++++++++++++++++++++++++
My ceiling is very low and when the hood is fixed to the wall at the minimum height above the hob the the cover still does not fit! Please advise of how to get the neatest cut and what type of blade/cutter to use (where to buy it if possible).
Also need to cut ventilation grooves at the top as I am now forced to use a carbon filter which recirculates the air, all be it clean, back into the kitchen
+++++++++++++++++++++++++++++
Please read the Forum Rules, especially 1a.
I am deleting your duplicate posts.
Mod Rupert.
+++++++++++++++++++++++++++++