- Joined
- 6 Nov 2008
- Messages
- 830
- Reaction score
- 16
- Country
Can anyone advise the best method for taking off about an inch from the top of a timber post already in place
Cutting top off fixed timber post
- Thread starter houstonwehaveaproblem
- Start date
A saw.
- Joined
- 6 Nov 2008
- Messages
- 830
- Reaction score
- 16
- Country
I could use a saw but it won't be a very straight cut
Sorry, I was being flippant, make up a flat jig out of 4 bits of wood and clamp it squarely on the post, then use it as a cutting guide.
In essence like this but it doesn't need to be as elaborate as that if a one off and can just be held in position with a clamp.
Or you can just buy something for the job eg https://www.ebay.co.uk/itm/17443405...NvteojkzK4LdZ_ItOngRjuUeGTIm3NxUaAi7fEALw_wcB
Lots of ways to crack this egg, a sharp saw will help.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Similar threads
