Had a problem with damp penetration in our bedroom wall and ceiling around the area of the front chimney stack see pic http://img.photobucket.com/albums/v386/reevesie/house.jpg so had the lead gutter replaced, new soakers and bottom part of chimney re-rendered and pebbledashed as all were knackered. This has not cured problem and is more noticeable after a downpour. Could the problem be due to naff flaunchings and/or poor lining condition. i know when we exposed the fireplace (had fibreboard covering it) there was a load of soot and plaster in the hearth. Any suggestions would be helpful, i am scratching my head with this one