This pump has started to leak from the PLASTIC blank plug (one pipe system), had been installed (with boiler) from new as far as I know a number of years ago.
Should a steel blanking plug have been used, and if so, why was the pump apparently supplied with this (plastic one) since it came configured as a one pipe system with the horseshoe washer pre installed?
Its located just to the right of the pump inlet braided hose.
Should a steel blanking plug have been used, and if so, why was the pump apparently supplied with this (plastic one) since it came configured as a one pipe system with the horseshoe washer pre installed?
Its located just to the right of the pump inlet braided hose.