- Joined
- 16 Jan 2010
- Messages
- 1
- Reaction score
- 0
- Country
First time on here so here goes.
i've removed a broken front door dg window which I intend to replace with another unit. However Ive a couple of questions firstly, the unit to be replaced measures aproximately 915mm X 560mm X 28mm, is this a common /universal type fitting ?
Secondly will I be able to walk into a local glaziers and purchased this off the shelf as it were, or will the unit have to be made to measure.
Any advice please greatly appreciated, oh! and what will it cost approximately, or will it be cheaper to have this done by a local firm.
i've removed a broken front door dg window which I intend to replace with another unit. However Ive a couple of questions firstly, the unit to be replaced measures aproximately 915mm X 560mm X 28mm, is this a common /universal type fitting ?
Secondly will I be able to walk into a local glaziers and purchased this off the shelf as it were, or will the unit have to be made to measure.
Any advice please greatly appreciated, oh! and what will it cost approximately, or will it be cheaper to have this done by a local firm.