Has anyone got any tips for removing the DHW heat exchanger from the Unica 32HE boiler? It's held in with two screws which are accessible, just, from the front of the boiler past all the pump and other pipe work. There is about 4cm behind the HE.
Can I remove those two screws, push the HE backwards 4cm to disconnect from the CH and DHW pipes, and then wiggle it out the side?
The installation manual doesn't actually cover removing the heat exchanger.
Thanks.
Can I remove those two screws, push the HE backwards 4cm to disconnect from the CH and DHW pipes, and then wiggle it out the side?
The installation manual doesn't actually cover removing the heat exchanger.
Thanks.