Hi, I bought a second hand cooker and just before I was going to put it in I noticed that my original cable coming from my cooker switch is alot thicker then the one coming out the back of the new over. Is this a problem?
My orignal cooker spec : 50hz - 240v, 11.4kw - 230v, 10.47kw
New cooker spec : 230v 50hz total load 9.8kw
Thats whats written on the plates on the front of both cookers. I believe there is a 30amp fuse in my consumer box. Thanks! Rich
My orignal cooker spec : 50hz - 240v, 11.4kw - 230v, 10.47kw
New cooker spec : 230v 50hz total load 9.8kw
Thats whats written on the plates on the front of both cookers. I believe there is a 30amp fuse in my consumer box. Thanks! Rich