Diplomat adp8322 dishwasher - Status codes

Joined
14 Oct 2009
Messages
12
Reaction score
0
Location
Leicestershire
Country
United Kingdom
Hi,

At what stage do I open the door to see the error codes? Or are they displayed when the fault occurs and then you open the door to see the flashing LED?

Cheers.
 
Joined
20 Oct 2010
Messages
835
Reaction score
103
Country
United Kingdom
Error codes appear when a fault is detected, your buttons are obviously located on the top trim of the door so not exposed when door is closed.
 
Sponsored Links
Joined
14 Oct 2009
Messages
12
Reaction score
0
Location
Leicestershire
Country
United Kingdom
I've held the Start button in for a few seconds and now it flashes 6 times and then pauses for a second and then flashes six times.

So I have a 6 error code?
 
Sponsored Links
Joined
20 Oct 2010
Messages
835
Reaction score
103
Country
United Kingdom
I'm no good with fault codes etc, just testing components etc and troubleshooting, sorry.
The error codes given on an lcd are much better and accurate whereas theres too much room for error reading the flashing lights
 
Top