Diverter Valve Question - quick one!

[dcackers]

Hello,

If the spindle on the diverter valve is working - as in it is correctly depressing the microswitch - does this mean the diaphragm is in working order, or could there still be an issue with it??

Thanks
Daniel

 

[Agile]

If that happens at about 2.5 li/min then that will be the case.

But the manifold section may not be following the actuator !

Tony

 

[dcackers]

Yes, the actautor is depressing the microswitch and water is flowing at a good rate.

Does this then mean that the valve behind the actuator isnt working? That'll mean a whole new 3-way valve then will it?

If you have a second - can you read my other post - this is related, but noone is answering!

Thankyou!
Daniel

 

[powell30]

Or the micro switch is broken......does the boiler fire when the pin makes the switch?