Hi,
I'm currently rennovating my bathroom in the loft.
The hot tap at the moment takes a good 10mins to fill the bath.
This is currently an old mixer tap.
The pipework is 15mm, with standard iso valves which I am replacing with full bore ones.
As I am also building a structure to hold a the cold water tank and fitting a pumped electric shower. (my mums electrician is doing the wiring)
My question is,
Will the bath fill quicker (from combi boiler) using a mixer tap or 2 single taps? Or is there no difference..
I'm currently rennovating my bathroom in the loft.
The hot tap at the moment takes a good 10mins to fill the bath.
This is currently an old mixer tap.
The pipework is 15mm, with standard iso valves which I am replacing with full bore ones.
As I am also building a structure to hold a the cold water tank and fitting a pumped electric shower. (my mums electrician is doing the wiring)
My question is,
Will the bath fill quicker (from combi boiler) using a mixer tap or 2 single taps? Or is there no difference..