Do these hoses exist?

[sparkymark75]

I'm looking for a flexible hose with a 22mm screw connection at one end and 15mm at the other. I can't seem to find one anywhere, do these actually exist?

Basically one of these: http://www.screwfix.com/p/wras-hose-22mm-x-15mm-x-500mm-x-10mm/40166

with the same fittings on the end as this: http://www.screwfix.com/p/wras-hose-1-2in-x-1-2in-x-500mm-x-10mm/82014

 

[leakydave]

So do you mean 22mm to ½"?

 

[sparkymark75]

So do you mean 22mm to ½"?

1/2" is around 13mm? I need a 22mm to 15mm.

 

[Madrab]

As LeakyD asked, what end do you want to keep? The 22mm to go to a 1/2"bsp tap connector?

 

[muggles]

I think he wants a ¾" × ½" flexible tap connector.

The simple answer is no, I don't think such a thing exists. You'd need to buy a ¾"×¾" flexible tap connector and a ¾"×½" bush

 

[sparkymark75]

If it helps any, it's a filling loop for a boiler. For some reason known only to the person that fitted it, there was a washing machine type hose connected to a stop valve on the cold water mains (22mm) which went to another valve (15mm) on the pipework going into the boiler.

The plastic insert in the screw fitting on the 15mm broke last night so I was looking for a replacement. Seems most filler loops are 15mm to 15mm.

 

[muggles]

Indeed they are. Change the whole filling loop to a WRAS approved one