Door Access Control System - Help with wiring up ?

[lucky1313]

Hi guys

I’m getting really confused setting up this system, I’ve got two guides which are in the photo.

Can anyone please help me wire this up with which wire goes where ?

I had it all set up a year ago when I was first testing it and it worked great but over the last year it was all pulled apart by my 2 year old daughter and I can’t for the life of me work it out again…kids

Any help much appreciated

 

[sparkymarka]

Wire as top diagram , you will only need to use the ground and 12+ from the power supply …

 

[lucky1313]

Great thanks Sparky

Which wires do I use on the green push button, there is 4 wires which is confusing me ‍


If I don’t need any other outputs from the cream ACU box apart from the 12v could I just use any 12v PSU and discard the ACU box?

Thanks again

 

[sparkymarka]

Two wires will be closed going open , two will be open going closed , you will use open going closed , I normally use a psu with battery back up as the mag lock will be open in a power fail …

 

[lucky1313]

amazing thanks for the help, all installed and working perfectly