Double socket earth connection

Joined
13 Nov 2008
Messages
1,571
Reaction score
35
Location
Avon
Country
United Kingdom
I’m sure I’m correct but just asking as I’ve never seen earth wire in two places.

Need to change this socket for one with USB ports.

I’m correct in saying I can put earth in the two places arrowed.

Normally I would see them both in one connection.
 

Attachments

  • IMG_4516.jpeg
    IMG_4516.jpeg
    650 KB · Views: 33
  • IMG_4517.jpeg
    IMG_4517.jpeg
    797.6 KB · Views: 34
As long as the 2 earth connection points are electrically joined together (which they are in your socket, and just about always will be), then that is fine.
 
I remember asking this when I was an apprentice, my old boss said it all pisșes in the same pot....always remember that technical explanation.
 
Ive now changed it & didnt look at back box.
The two screws on faceplate do screw into a metal fixing threaded hole.
Its fitted into drywall if that's what you call it.
I did one at a time.

I removed the 2 live & fitted to new live in face place.
I removed the 2 neutral & fitted to new neutral in face plate.

I then put 1 earth in one earth fitting & the other earth in the other earth fitting, so as post # 3

To me i have now done the same as what was there originally.
 
Ive now changed it & didnt look at back box.
The two screws on faceplate do screw into a metal fixing threaded hole.
Its fitted into drywall if that's what you call it.
I did one at a time.

I removed the 2 live & fitted to new live in face place.
I removed the 2 neutral & fitted to new neutral in face plate.

I then put 1 earth in one earth fitting & the other earth in the other earth fitting, so as post # 3

To me i have now done the same as what was there originally.
Here is a scenario to consider. One of the live wires chafes (ie no grommet used) and makes contact with the metal back box or plate screw (I have often seen faceplate screws that have gone through conductors because the wires weren't pushed neatly into the back box).

You have a plastic socket but the now live back box conducts through the two screws so you have two live metal screws on the plastic faceplate of your socket waiting to bite the unwary. This is the reason you should put another wire from the plate to the back box if it's metal. It doesn't matter what others have done in the past, two wrongs don't make a right as Mum used to say.

Can't tell from your photo if it's a metal back box or not. Which is why you should look at the box when doing this job.
 
Here is a scenario to consider. One of the live wires chafes (ie no grommet used) and makes contact with the metal back box or plate screw (I have often seen faceplate screws that have gone through conductors because the wires weren't pushed neatly into the back box).

You have a plastic socket but the now live back box conducts through the two screws so you have two live metal screws on the plastic faceplate of your socket waiting to bite the unwary. This is the reason you should put another wire from the plate to the back box if it's metal. It doesn't matter what others have done in the past, two wrongs don't make a right as Mum used to say.
A 3.5mm pin head is deemed not enough live surface to be a problem.

Read that somewhere I think....it's not like you can grab it or even touch it really.
 
A 3.5mm pin head is deemed not enough live surface to be a problem.

Read that somewhere I think....it's not like you can grab it or even touch it really.
Not sure I believe that. A plate screw head is more like 6mm dia (28 sq mm area) located right where fingers will go. As they say it's the volts that jolt but the mils that kills.
 
So are you saying take faceplate off again & check whats fitted / put photo here ?

If its metal then add an extra earth BUT if not leave as is.

Please advise Thanks
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top