T
teddyb
Hi there
We have drayton wireless control for our central heating, which was working really well .... until a plumber was working, needed the power off and then pressed some buttons on the SCR. I suspect he shouldn't have done! The rf3 is not not sending, or the SCR is not receiving anymore so we are having to manually override in order to get the heating.
We have the instructions for commissioning the system, is that what we should do? We also have the set up instructions. What we don't have is a troubleshooting section, for when things, like this, happen.
Can anyone please advise how to remedy this?
As always, I shall be really grateful for your advice.
Thanks,
We have drayton wireless control for our central heating, which was working really well .... until a plumber was working, needed the power off and then pressed some buttons on the SCR. I suspect he shouldn't have done! The rf3 is not not sending, or the SCR is not receiving anymore so we are having to manually override in order to get the heating.
We have the instructions for commissioning the system, is that what we should do? We also have the set up instructions. What we don't have is a troubleshooting section, for when things, like this, happen.
Can anyone please advise how to remedy this?
As always, I shall be really grateful for your advice.
Thanks,